Dust-Free Feeding Station For Small Bags

The small bag dust-free feeding station is a equipment used for feeding bagged or barreled powder and granular materials within 50KG. According to the process requirements, it can be used with vibrating hopper or stirring hopper for unloading, which is used for unloading small bags of powdery materials that are not easy to flow.

Request Information & Get a Quote

Principle Introduction

The operator places the bag on the stand and pushes it into the grid. Then, the operator cuts a vertical opening in the bag, and dumps the shake bag to empty it, and the material falls into the hopper by power, and can be connected with the conveying unit equipment through the conveying pipe at the bottom, and the material is output to the specified position. The built-in induced air dust collector collects dust from the dust produced during the bag emptying process. The filter is cleaned by a reverse compressed air jet, and the cleaned dust falls back into the hopper for continuous feeding.

The small bag feeding station, also known as the dust-free feeding station, is a kind of equipment used for unloading small bag powdery materials, which has the function of reducing the discharge dust, and the equipped vibrating screen has the function of filtering foreign matter.

Equipment Advantages

• The calculated air volume and filtration area adaptation ratio make the air speed of the feeding port optimal, which not only captures the overflowing dust but also reasonably reduces the dust adhesion concentration of the filter cartridge;
• Ergonomic design, the height of the feeding port is about 0.75 meters, which is more convenient and easy to feed;
• Gas spring auxiliary opening and closing of the warehouse door is more labor-saving;
• The filter bracket can prevent sundries such as bags or scissors from being mistakenly put into the silo;
• Three-tube independent pulse backflush design to ensure the backflush effect and filter life;
• It can increase the sound and light alarm function of the bottom material level, and automatically remind the workers to feed when there is no material;
• According to the actual use of the project, non-standard design dimensions and installation methods;
• Wide range of application, to meet the feeding of all solid materials.

Features

• Simple structure, easy to operate, easy to maintain and operate;
• Realize fully enclosed bag opening and pipeline transportation;
• No dead angle design, easy to clean;
• Automatic dust collection system to avoid dust flying and improve the working environment;
• The same specification of bag opening station can be applied to different processing capacity requirements;
• Suitable for all industries involving powders, such as food, chemical industry, battery, etc.